Spock comes with a powerful extension mechanism, which allows to hook into a spec’s lifecycle to enrich or alter its behavior. In this chapter, we will first learn about Spock’s built-in extensions, and then dive into writing custom extensions.

Spock Configuration File

Some extensions can be configured with options in a Spock configuration file. The description for each extension will mention how it can be configured. All those configurations are in a Groovy file that usually is called SpockConfig.groovy. Spock first searches for a custom location given in a system property called spock.configuration which is then used either as classpath location or if not found as file system location if it can be found there, otherwise the default locations are investigated for a configuration file. Next it searches for the SpockConfig.groovy in the root of the test execution classpath. If there is also no such file, you can at last have a SpockConfig.groovy in your Spock user home. This by default is the directory .spock within your home directory, but can be changed using the system property spock.user.home or if not set the environment property SPOCK_USER_HOME.

Stack Trace Filtering

You can configure Spock whether it should filter stack traces or not by using the configuration file. The default value is true.

Stack Trace Filtering Configuration
runner {
  filterStackTrace false
}

Parallel Execution Configuration

runner {
  parallel {
    //...
  }
}

See the Parallel Execution section for a detailed description.

Built-In Extensions

Most of Spock’s built-in extensions are annotation-driven. In other words, they are triggered by annotating a spec class or method with a certain annotation. You can tell such an annotation by its @ExtensionAnnotation meta-annotation.

Ignore

To temporarily prevent a feature method from getting executed, annotate it with spock.lang.Ignore:

@Ignore
def "my feature"() { ... }

For documentation purposes, a reason can be provided:

@Ignore("TODO")
def "my feature"() { ... }

To ignore a whole specification, annotate its class:

@Ignore
class MySpec extends Specification { ... }

In most execution environments, ignored feature methods and specs will be reported as "skipped".

Care should be taken when ignoring feature methods in a spec class annotated with spock.lang.Stepwise since later feature methods may depend on earlier feature methods having executed.

IgnoreRest

To ignore all but a (typically) small subset of methods, annotate the latter with spock.lang.IgnoreRest:

def "I'll be ignored"() { ... }

@IgnoreRest
def "I'll run"() { ... }

def "I'll also be ignored"() { ... }

@IgnoreRest is especially handy in execution environments that don’t provide an (easy) way to run a subset of methods.

Care should be taken when ignoring feature methods in a spec class annotated with spock.lang.Stepwise since later feature methods may depend on earlier feature methods having executed.

IgnoreIf

To ignore a feature method or specification under certain conditions, annotate it with spock.lang.IgnoreIf, followed by a predicate:

@IgnoreIf({ System.getProperty("os.name").toLowerCase().contains("windows") })
def "I'll run everywhere but on Windows"() {

To make predicates easier to read and write, the following properties are available inside the closure:

  • sys A map of all system properties

  • env A map of all environment variables

  • os Information about the operating system (see spock.util.environment.OperatingSystem)

  • jvm Information about the JVM (see spock.util.environment.Jvm)

  • instance The specification instance if instance fields, shared fields or instance methods are needed. If this property is used, the whole annotated element cannot be skipped up-front without executing fixtures, data providers and similar. Instead the whole workflow is followed up to the feature method invocation, where then the closure is checked and it is decided whether to abort the specific iteration or not.

Using the os property, the previous example can be rewritten as:

@IgnoreIf({ os.windows })
def "I will run everywhere but on Windows"() {

If multiple @IgnoreIf annotations are present, they are effectively combined with a logical "or". The annotated element is skipped if any of the conditions evaluates to true:

@IgnoreIf({ os.windows })
@IgnoreIf({ jvm.java8 })
def "I'll run everywhere but on Windows or anywhere on Java 8"() {

Care should be taken when ignoring feature methods in a spec class annotated with spock.lang.Stepwise since later feature methods may depend on earlier feature methods having executed.

To use IDE support like code completion, you can also use the argument to the closure and have it typed as org.spockframework.runtime.extension.builtin.PreconditionContext. This enables the IDE with type information which is not available otherwise:

@IgnoreIf({ PreconditionContext it -> it.os.windows })
def "I will run everywhere but not on Windows"() {

If applied to a data driven feature, the closure can also access the data variables. If the closure does not reference any actual data variables or is applied to a spec, the whole annotated element is skipped up-front, no fixtures, data providers or anything else will be executed. But if the closure actually does reference valid data variables, the whole workflow is followed up to the feature method invocation, where then the closure is checked and it is decided whether to abort the specific iteration or not.

Requires

To execute a feature method under certain conditions, annotate it with spock.lang.Requires, followed by a predicate:

@Requires({ os.windows })
def "I'll only run on Windows"() {

Requires works exactly like IgnoreIf, except that the predicate is inverted. In general, it is preferable to state the conditions under which a method gets executed, rather than the conditions under which it gets ignored.

If multiple @Requires annotations are present, they are effectively combined with a logical "and". The annotated element is skipped if any of the conditions evaluates to false:

@Requires({ os.windows })
@Requires({ jvm.java8 })
def "I'll run only on Windows with Java 8"() {

PendingFeature

To indicate that the feature is not fully implemented yet and should not be reported as error, annotate it with spock.lang.PendingFeature.

The use case is to annotate tests that can not yet run but should already be committed. The main difference to Ignore is that the test are executed, but test failures are ignored. If the test passes without an error, then it will be reported as failure since the PendingFeature annotation should be removed. This way the tests will become part of the normal tests instead of being ignored forever.

Groovy has the groovy.transform.NotYetImplemented annotation which is similar but behaves a differently.

  • it will mark failing tests as passed

  • if at least one iteration of a data-driven test passes it will be reported as error

PendingFeature:

  • it will mark failing tests as skipped

  • if at least one iteration of a data-driven test fails it will be reported as skipped

  • if every iteration of a data-driven test passes it will be reported as error

@PendingFeature
def "not implemented yet"() { ... }

PendingFeatureIf

To conditionally indicate that a feature is not fully implemented, and should not be reported as an error you can annotate it as spock.lang.PendingFeatureIf and include a precondition similar to IgnoreIf or Requires

If the conditional expression passes it behaves the same way as PendingFeature, otherwise it does nothing.

For instance, annotating a feature as @PendingFeatureIf({ false }) effectively does nothing, but annotating it as @PendingFeatureIf({ true }) behaves the same was as if it was marked as @PendingFeature

If applied to a data driven feature, the closure can also access the data variables. If the closure does not reference any actual data variables, the whole feature is deemed pending and only if all iterations become successful will be marked as failing. But if the closure actually does reference valid data variables, the individual iterations where the condition holds are deemed pending and each will individually fail as soon as it would be successful without this annotation.

@PendingFeatureIf({ os.windows })
def "I'm not yet implemented on windows, but I am on other operating systems"() {

@PendingFeatureIf({ sys.targetEnvironment == "prod" })
def "This feature isn't deployed out to production yet, and isn't expected to pass"() {

It is also supported to have multiple @PendingFeatureIf annotations or a mixture of @PendingFeatureIf and @PendingFeature, for example to ignore certain exceptions only under certain conditions.

@PendingFeature(exceptions = UnsupportedOperationException)
@PendingFeatureIf(
  exceptions = IllegalArgumentException,
  value = { os.windows },
  reason = 'Does not yet work on Windows')
@PendingFeatureIf(
  exceptions = IllegalAccessException,
  value = { jvm.java8 },
  reason = 'Does not yet work on Java 8')
def "I have various problems in certain situations"() {

Stepwise

To execute features in the order that they are declared, annotate a spec class with spock.lang.Stepwise:

@Stepwise
class RunInOrderSpec extends Specification {
  def "I run first"()  { ... }
  def "I run second"() { ... }
}

Stepwise only affects the class carrying the annotation; not sub or super classes. Features after the first failure are skipped.

Stepwise does not override the behaviour of annotations such as Ignore, IgnoreRest, and IgnoreIf, so care should be taken when ignoring feature methods in spec classes annotated with Stepwise.

Note
 This will also set the execution mode to SAME_THREAD, see Parallel Execution for more information.

Timeout

To fail a feature method, fixture, or class that exceeds a given execution duration, use spock.lang.Timeout, followed by a duration, and optionally a time unit. The default time unit is seconds.

When applied to a feature method, the timeout is per execution of one iteration, excluding time spent in fixture methods:

@Timeout(5)
def "I fail if I run for more than five seconds"() { ... }

@Timeout(value = 100, unit = TimeUnit.MILLISECONDS)
def "I better be quick" { ... }

Applying Timeout to a spec class has the same effect as applying it to each feature that is not already annotated with Timeout, excluding time spent in fixtures:

@Timeout(10)
class TimedSpec extends Specification {
  def "I fail after ten seconds"() { ... }
  def "Me too"() { ... }

  @Timeout(value = 250, unit = MILLISECONDS)
  def "I fail much faster"() { ... }
}

When applied to a fixture method, the timeout is per execution of the fixture method.

When a timeout is reported to the user, the stack trace shown reflects the execution stack of the test framework when the timeout was exceeded.

Retry

The @Retry extensions can be used for flaky integration tests, where remote systems can fail sometimes. By default it retries an iteration 3 times with 0 delay if either an Exception or AssertionError has been thrown, all this is configurable. In addition, an optional condition closure can be used to determine if a feature should be retried. It also provides special support for data driven features, offering to either retry all iterations or just the failing ones.

class FlakyIntegrationSpec extends Specification {
  @Retry
  def retry3Times() { ... }

  @Retry(count = 5)
  def retry5Times() { ... }

  @Retry(exceptions=[IOException])
  def onlyRetryIOException() { ... }

  @Retry(condition = { failure.message.contains('foo') })
  def onlyRetryIfConditionOnFailureHolds() { ... }

  @Retry(condition = { instance.field != null })
  def onlyRetryIfConditionOnInstanceHolds() { ... }

  @Retry
  def retryFailingIterations() {
    ...
    where:
    data << sql.select()
  }

  @Retry(mode = Retry.Mode.FEATURE)
  def retryWholeFeature() {
    ...
    where:
    data << sql.select()
  }

  @Retry(delay = 1000)
  def retryAfter1000MsDelay() { ... }
}

Retries can also be applied to spec classes which has the same effect as applying it to each feature method that isn’t already annotated with {@code Retry}.

@Retry
class FlakyIntegrationSpec extends Specification {
  def "will be retried with config from class"() {
    ...
  }
  @Retry(count = 5)
  def "will be retried using its own config"() {
    ...
  }
}

A {@code @Retry} annotation that is declared on a spec class is applied to all features in all subclasses as well, unless a subclass declares its own annotation. If so, the retries defined in the subclass are applied to all feature methods declared in the subclass as well as inherited ones.

Given the following example, running FooIntegrationSpec will execute both inherited and foo with one retry. Running BarIntegrationSpec will execute inherited and bar with two retries.

@Retry(count = 1)
abstract class AbstractIntegrationSpec extends Specification {
  def inherited() {
    ...
  }
}

class FooIntegrationSpec extends AbstractIntegrationSpec {
  def foo() {
    ...
  }
}

@Retry(count = 2)
class BarIntegrationSpec extends AbstractIntegrationSpec {
  def bar() {
    ...
  }
}

Check RetryFeatureExtensionSpec for more examples.

Use

To activate one or more Groovy categories within the scope of a feature method or spec, use spock.util.mop.Use:

class ListExtensions {
  static avg(List list) { list.sum() / list.size() }
}

class UseDocSpec extends Specification {
  @Use(ListExtensions)
  def "can use avg() method"() {
    expect:
    [1, 2, 3].avg() == 2
  }
}

This can be useful for stubbing of dynamic methods, which are usually provided by the runtime environment (e.g. Grails). It has no effect when applied to a helper method. However, when applied to a spec class, it will also affect its helper methods.

To use multiple categories, you can either give multiple categories to the value attribute of the annotation or you can apply the annotation multiple times to the same target.

Note
 This will also set the execution mode to SAME_THREAD if applied on a Specification, see Parallel Execution for more information.

ConfineMetaClassChanges

To confine meta class changes to the scope of a feature method or spec class, use spock.util.mop.ConfineMetaClassChanges:

@Stepwise
class ConfineMetaClassChangesDocSpec extends Specification {
  @ConfineMetaClassChanges(String)
  def "I run first"() {
    when:
    String.metaClass.someMethod = { delegate }

    then:
    String.metaClass.hasMetaMethod('someMethod')
  }

  def "I run second"() {
    when:
    "Foo".someMethod()

    then:
    thrown(MissingMethodException)
  }
}

When applied to a spec class, the meta classes are restored to the state that they were in before setupSpec was executed, after cleanupSpec is executed.

When applied to a feature method, the meta classes are restored to as they were after setup was executed, before cleanup is executed.

To confine meta class changes for multiple classes, you can either give multiple classes to the value attribute of the annotation or you can apply the annotation multiple times to the same target.

Caution
 Temporarily changing the meta classes is only safe when specs are run in a single thread per JVM. Even though many execution environments do limit themselves to one thread per JVM, keep in mind that Spock cannot enforce this.
Note
 This will acquire a READ_WRITE lock for Resources.META_CLASS_REGISTRY, see Parallel Execution for more information.

RestoreSystemProperties

Saves system properties before the annotated feature method (including any setup and cleanup methods) gets run, and restores them afterwards.

Applying this annotation to a spec class has the same effect as applying it to all its feature methods.

@RestoreSystemProperties
def "determines family based on os.name system property"() {
  given:
  System.setProperty('os.name', 'Windows 7')

  expect:
  OperatingSystem.current.family == OperatingSystem.Family.WINDOWS
}
Caution
 Temporarily changing the values of system properties is only safe when specs are run in a single thread per JVM. Even though many execution environments do limit themselves to one thread per JVM, keep in mind that Spock cannot enforce this.
Note
 This will acquire a READ_WRITE lock for Resources.SYSTEM_PROPERTIES, see Parallel Execution for more information.

AutoAttach

Automatically attaches a detached mock to the current Specification. Use this if there is no direct framework support available. Spring and Guice dependency injection is automatically handled by the Spring Module and Guice Module respectively.

AutoCleanup

Automatically clean up a field or property at the end of its lifetime by using spock.lang.AutoCleanup.

By default, an object is cleaned up by invoking its parameterless close() method. If some other method should be called instead, override the annotation’s value attribute:

// invoke foo.dispose()
@AutoCleanup("dispose")
def foo

If multiple fields or properties are annotated with AutoCleanup, their objects are cleaned up sequentially, in reverse field/property declaration order, starting from the most derived class class and walking up the inheritance chain.

If a cleanup operation fails with an exception, the exception is reported by default, and cleanup proceeds with the next annotated object. To prevent cleanup exceptions from being reported, override the annotation’s quiet attribute:

@AutoCleanup(quiet = true)
def ignoreMyExceptions

TempDir

In order to generate a temporary directory for test and delete it after test, annotate a member field of type java.io.File, java.nio.file.Path or untyped using def in a spec class (def will inject a Path). If the annotated field is @Shared, the temporary directory will be shared in the corresponding specification, otherwise every feature method and every iteration per parametrized feature method will have their own temporary directories:

// all features will share the same temp directory path1
@TempDir
@Shared
Path path1

// all features and iterations will have their own path2
@TempDir
File path2

// will be injected using java.nio.file.Path
@TempDir
def path3

def demo() {
  expect:
  path1 instanceof Path
  path2 instanceof File
  path3 instanceof Path
}

If you want to customize the parent directory for temporary directories, you can use the Spock Configuration File.

If keep is set to true, Spock will not delete temporary directories after tests. The default value is taken from system property spock.tempDir.keep or false, if undefined.

Temporary Directory Configuration
tempdir {
  // java.nio.Path object, default null,
  // which means system property "java.io.tmpdir"
  baseDir Paths.get("/tmp")
  // boolean, default is system property "spock.tempDir.keep"
  keep true
}

Title and Narrative

To attach a natural-language name to a spec, use spock.lang.Title:

@Title("This is easy to read")
class ThisIsHarderToReadSpec extends Specification {
  ...
}

Similarly, to attach a natural-language description to a spec, use spock.lang.Narrative:

@Narrative("""
As a user
I want foo
So that bar
""")
class GiveTheUserFooSpec() { ... }

See

To link to one or more references to external information related to a specification or feature, use spock.lang.See:

@See("http://spockframework.org/spec")
class SeeDocSpec extends Specification {
  @See(["http://en.wikipedia.org/wiki/Levenshtein_distance", "http://www.levenshtein.net/"])
  def "Even more information is available on the feature"() {
    expect: true
  }

  @See("http://www.levenshtein.de/")
  @See(["http://en.wikipedia.org/wiki/Levenshtein_distance", "http://www.levenshtein.net/"])
  def "And even more information is available on the feature"() {
    expect: true
  }
}

Issue

To indicate that a feature or spec relates to one or more issues in an external tracking system, use spock.lang.Issue:

@Issue("http://my.issues.org/FOO-1")
class IssueDocSpec extends Specification {
  @Issue("http://my.issues.org/FOO-2")
  def "Foo should do bar"() {
    expect: true
  }

  @Issue(["http://my.issues.org/FOO-3", "http://my.issues.org/FOO-4"])
  def "I have two related issues"() {
    expect: true
  }

  @Issue(["http://my.issues.org/FOO-5", "http://my.issues.org/FOO-6"])
  @Issue("http://my.issues.org/FOO-7")
  def "I have three related issues"() {
    expect: true
  }
}

If you have a common prefix URL for all issues in a project, you can use the Spock Configuration File to set it up for all at once. If it is set, it is prepended to the value of the @Issue annotation when building the URL.

If the issueNamePrefix is set, it is prepended to the value of the @Issue annotation when building the name for the issue.

Issue Configuration
report {
    issueNamePrefix 'Bug '
    issueUrlPrefix 'http://my.issues.org/'
}

Subject

To indicate one or more subjects of a spec, use spock.lang.Subject:

@Subject([Foo, Bar])
class SubjectDocSpec extends Specification {

You can also use multiple @Subject annotations:

@Subject(Foo)
@Subject(Bar)
class SubjectDocSpec extends Specification {

Additionally, Subject can be applied to fields and local variables:

@Subject
Foo myFoo

Subject currently has only informational purposes.

Rule

Spock understands @org.junit.Rule annotations on non-@Shared instance fields. The according rules are run at the iteration interception point in the Spock lifecycle. This means that the rules before-actions are done before the execution of setup methods and the after-actions are done after the execution of cleanup methods.

ClassRule

Spock understands @org.junit.ClassRule annotations on @Shared fields. The according rules are run at the specification interception point in the Spock lifecycle. This means that the rules before-actions are done before the execution of setupSpec methods and the after-actions are done after the execution of cleanupSpec methods.

Include and Exclude

Spock is capable of including and excluding specifications according to their classes, super-classes and interfaces and according to annotations that are applied to the specification. Spock is also capable of including and excluding individual features according to annotations that are applied to the feature method. The configuration for what to include or exclude is done according to the Spock Configuration File section.

Include / Exclude Configuration
import some.pkg.Fast
import some.pkg.IntegrationSpec

runner {
  include Fast // could be either an annotation or a (base) class
  exclude {
    annotation some.pkg.Slow
    baseClass IntegrationSpec
  }
}

Optimize Run Order

Spock can remember which features last failed and how often successively and also how long a feature needed to be tested. For successive runs Spock will then first run features that failed at last run and first features that failed more often successively. Within the previously failed or non-failed features Spock will run the fastest tests first. This behaviour can be enabled according to the Spock Configuration File section. The default value is false.

Optimize Run Order Configuration
runner {
  optimizeRunOrder true
}

Third-Party Extensions

You can find a list of third-party extensions in the Spock Wiki.

Writing Custom Extensions

There are two types of extensions that can be created for usage with Spock. These are global extensions and annotation driven local extensions. For both extension types you implement a specific interface which defines some callback methods. In your implementation of those methods you can set up the magic of your extension, for example by adding interceptors to various interception points that are described below.

It depends on your use case which type of annotation you create. If you want to do something once during the Spock run - at the start or end - or want to apply something to all executed specifications without the user of the extension having to do anything besides including your extension in the classpath, then you should opt for a global extension. If you instead want to apply your magic only by choice of the user, then you should implement an annotation driven local extension.

Global Extensions

To create a global extension you need to create a class that implements the interface IGlobalExtension and put its fully-qualified class name in a file META-INF/services/org.spockframework.runtime.extension.IGlobalExtension in the class path. As soon as these two conditions are satisfied, the extension is automatically loaded and used when Spock is running.

IGlobalExtension has the following three methods:

start()

This is called once at the very start of the Spock execution.

visitSpec(SpecInfo spec)

This is called once for each specification. In this method you can prepare a specification with your extension magic, like attaching interceptors to various interception points as described in the chapter Interceptors.

stop()

This is called at least once at the very end of the Spock execution.

Annotation Driven Local Extensions

To create an annotation driven local extension you need to create a class implementing the interface IAnnotationDrivenExtension. As type argument to the interface you need to supply an annotation class having @Retention set to RUNTIME, @Target set to one or more of FIELD, METHOD, and TYPE - depending on where you want your annotation to be applicable - and @ExtensionAnnotation applied, with the IAnnotationDrivenExtension class as argument. Of course the annotation class can have some attributes with which the user can further configure the behaviour of the extension for each annotation application.

Your annotation can be applied to a specification, a feature method, a fixture method or a field. On all other places like helper methods or other places if the @Target is set accordingly, the annotation will be ignored and has no effect other than being visible in the source code, except you check its existence in other places yourself.

Since Spock 2.0 your annotation can also be defined as @Repeatable and applied multiple times to the same target. IAnnotationDrivenExtension has visit…​Annotations methods that are called by Spock with all annotations of the extension applied to the same target. Their default implementations will then call the respective singular visit…​Annotation method once for each annotation. If you want a repeatable annotation that is compatible with Spock before 2.0 you need to make the container annotation an extension annotation itself and handle all cases accordingly, but you need to make sure to only handle the container annotation if Spock version is before 2.0, or your annotations might be handled twice. Be aware that the repeatable annotation can be attached to the target directly, inside the container annotation or even both if the user added the container annotation manually and also attached one annotation directly.

IAnnotationDrivenExtension has the following nine methods, where in each you can prepare a specification with your extension magic, like attaching interceptors to various interception points as described in the chapter Interceptors:

visitSpecAnnotations(List<T> annotations, SpecInfo spec)

This is called once for each specification where the annotation is applied one or multiple times with the annotation instances as first parameter, and the specification info object as second parameter. The default implementation calls visitSpecAnnotation once for each given annotation.

visitSpecAnnotation(T annotation, SpecInfo spec)

This is used as singular delegate for visitSpecAnnotations and is otherwise not called by Spock directly. The default implementation throws an exception.

visitFieldAnnotations(List<T> annotations, FieldInfo field)

This is called once for each field where the annotation is applied one or multiple times with the annotation instances as first parameter, and the field info object as second parameter. The default implementation calls visitFieldAnnotation once for each given annotation.

visitFieldAnnotation(T annotation, FieldInfo field)

This is used as singular delegate for visitFieldAnnotations and is otherwise not called by Spock directly. The default implementation throws an exception.

visitFixtureAnnotations(List<T> annotations, MethodInfo fixtureMethod)

This is called once for each fixture method where the annotation is applied one or multiple times with the annotation instances as first parameter, and the fixture method info object as second parameter. The default implementation calls visitFixtureAnnotation once for each given annotation.

visitFixtureAnnotation(T annotation, MethodInfo fixtureMethod)

This is used as singular delegate for visitFixtureAnnotations and is otherwise not called by Spock directly. The default implementation throws an exception.

visitFeatureAnnotations(List<T> annotations, FeatureInfo feature)

This is called once for each feature method where the annotation is applied one or multiple times with the annotation instances as first parameter, and the feature info object as second parameter. The default implementation calls visitFeatureAnnotation once for each given annotation.

visitFeatureAnnotation(T annotation, FeatureInfo feature)

This is used as singular delegate for visitFeatureAnnotations and is otherwise not called by Spock directly. The default implementation throws an exception.

visitSpec(SpecInfo spec)

This is called once for each specification within which the annotation is applied to at least one of the supported places like defined above. It gets the specification info object as sole parameter. This method is called after all other methods of this interface for each applied annotation are processed.

Configuration Objects

You can add own sections in the Spock Configuration File for your extension by creating POJOs or POGOs that are annotated with @ConfigurationObject and have a default constructor (either implicitly or explicitly). The argument to the annotation is the name of the top-level section that is added to the Spock configuration file syntax. The default values for the configuration options are defined in the class by initializing the fields at declaration time or in the constructor. In the Spock configuration file those values can then be edited by the user of your extension.

Note
 It is an error to have multiple configuration objects with the same name, so choose wisely if you pick one and probably prefix it with some package-like name to minimize the risk for name clashes with other extensions or the core Spock code.

To use the values of the configuration object in your extension, you can either use constructor injection or field injection.

  • To use constructor injection just define a constructor with one or more configuration object parameters.

  • To use field injection just define an uninitialized non-final instance field of that type.

Spock will then automatically create exactly one instance of the configuration object per Spock run, apply the settings from the configuration file to it (before the start() methods of global extensions are called) and inject that instance into the extension class instances.

Note
 Constructor injection has a higher priority than field injection and Spock won’t inject any fields if it finds a suitable constructor. If you want to support both Spock 1.x and 2.x you can either use only field injection (Spock 1.x only supports field injection), or you can have both a default constructor and an injectable constructor, this way Spock 2.x will use constructor injection and Spock 1.x will use field injection.

If a configuration object should be used exclusively in an annotation driven local extension you must register it in META-INF/services/spock.config.ConfigurationObject. This is similar to a global extension, put the fully-qualified class name of the annotated class on a new line in the file. This will cause the configuration object to properly get initialized and populated with the settings from the configuration file. However, if the configuration object is used in a global extension, you can also use it just fine in an annotation driven local extension. If the configuration object is only used in an annotation driven local extension, you will get an exception when then configuration object is to be injected into the extension, and you will also get an error when the configuration file is evaluated, and it contains the section, as the configuration object is not properly registered yet.

Interceptors

For applying the magic of your extension, there are various interception points, where you can attach interceptors from the extension methods described above to hook into the Spock lifecycle. For each interception point there can of course be multiple interceptors added by arbitrary Spock extensions (shipped or 3rd party). Their order currently depends on the order they are added, but there should not be made any order assumptions within one interception point.

Spock Interceptors
Figure 1. Spock Interceptors

An ellipsis in the figure means that the block before it can be repeated an arbitrary amount of times.

The …​ method interceptors are of course only run if there are actual methods of this type to be executed (the white boxes) and those can inject parameters to be given to the method that will be run.

The difference between shared initializer interceptor and shared initializer method interceptor and between initializer interceptor and initializer method interceptor - as there can be at most one of those methods each - is, that there are only the two methods if there are @Shared, respectively non-@Shared, fields that get values assigned at declaration time. The compiler will put those initializations in a generated method and call it at the proper place in the lifecycle. So if there are no such initializations, no method is generated and thus the method interceptor is never called. The non-method interceptors are always called at the proper place in the lifecycle to do work that has to be done at that time.

To create an interceptor to be attached to an interception point, you need to create a class that implements the interface IMethodInterceptor. This interface has the sole method intercept(IMethodInvocation invocation). The invocation parameter can be used to get and modify the current state of execution. Each interceptor must call the method invocation.proceed(), which will go on in the lifecycle, except you really want to prevent further execution of the nested elements like shown in the figure above. But this should be a very rare use case.

If you write an interceptor that can be used at different interception points and should do different work at different interception points, there is also the convenience class AbstractMethodInterceptor, which you can extend and which provides various methods for overriding that are called for the various interception points. Most of these methods have a double meaning, like interceptSetupMethod which is called for the setup interceptor and the setup method interceptor. If you attach your interceptor to both of them and need a differentiation, you can check for invocation.method.reflection, which will be set in the method interceptor case and null otherwise. Alternatively you can of course build two different interceptors or add a parameter to your interceptor and create two instances, telling each at addition time whether it is attached to the method interceptor or the other one.

Add All Interceptors
class I extends AbstractMethodInterceptor { I(def s) {} }

// On SpecInfo
specInfo.addSharedInitializerInterceptor new I('shared initializer')
specInfo.sharedInitializerMethod?.addInterceptor new I('shared initializer method')
specInfo.addInterceptor new I('specification')
specInfo.addSetupSpecInterceptor new I('setup spec')
specInfo.setupSpecMethods*.addInterceptor new I('setup spec method')
specInfo.allFeatures*.addInterceptor new I('feature')
specInfo.addInitializerInterceptor new I('initializer')
specInfo.initializerMethod?.addInterceptor new I('initializer method')
specInfo.allFeatures*.addIterationInterceptor new I('iteration')
specInfo.addSetupInterceptor new I('setup')
specInfo.setupMethods*.addInterceptor new I('setup method')
specInfo.allFeatures*.featureMethod*.addInterceptor new I('feature method')
specInfo.addCleanupInterceptor new I('cleanup')
specInfo.cleanupMethods*.addInterceptor new I('cleanup method')
specInfo.addCleanupSpecInterceptor new I('cleanup spec')
specInfo.cleanupSpecMethods*.addInterceptor new I('cleanup spec method')
specInfo.allFixtureMethods*.addInterceptor new I('fixture method')

// on FeatureInfo
featureInfo.addInterceptor new I('feature')
featureInfo.addIterationInterceptor new I('iteration')
featureInfo.featureMethod.addInterceptor new I('feature method')

Injecting Method Parameters

If your interceptor should support custom method parameters for wrapped methods, this can be done by modifying invocation.arguments. Two use cases for this would be a mocking framework that can inject method parameters that are annotated with a special annotation, or some test helper that injects objects of a specific type that are created and prepared for usage automatically.

When called from at least Spock 2.0, the arguments array will always have the size of the method parameter count, so you can directly set the arguments you want to set. You cannot change the size of the arguments array either. All parameters that did not yet get any value injected, either from data variables or some extension, will have the value MethodInfo.MISSING_ARGUMENT and if any of those remain, after all interceptors were run, an exception will be thrown.

Note

When your extension might be used with a version before Spock 2.0, the arguments array may be an empty array or an array of arbitrary length, depending on what interceptors were run before that maybe also have manipulated this array for parameter injection. If you for example investigated the method parameters with invocation.method.reflection.parameters and found that you want to inject the fifth parameter, you should first check whether the arguments array is at least five elements long. If not, you should assign it a new array that is at least five elements long and copy the contents of the old array into the new one. Then you can assign your objects to be injected.

Inject Method Parameters
// create a map of all MyInjectable parameters with their parameter index
Map<Parameter, Integer> parameters = [:]
invocation.method.reflection.parameters.eachWithIndex { parameter, i ->
  parameters << [(parameter): i]
}
parameters = parameters.findAll { MyInjectable.equals it.key.type }

// enlarge arguments array if necessary
def lastMyInjectableParameterIndex = parameters*.value.max()
lastMyInjectableParameterIndex = lastMyInjectableParameterIndex == null ?
                                 0 :
                                 lastMyInjectableParameterIndex + 1
if(invocation.arguments.length < lastMyInjectableParameterIndex) {
  def newArguments = new Object[lastMyInjectableParameterIndex]
  System.arraycopy invocation.arguments, 0, newArguments, 0, invocation.arguments.length
  invocation.arguments = newArguments
}

parameters.each { parameter, i ->
  invocation.arguments[i] = new MyInjectable(parameter)
}
Note

Pre Spock 2.0 only: When using data driven features (methods with a where: block), the user of your extension has to follow some restrictions, if parameters should be injected by your extension:

  • all data variables and all to-be-injected parameters have to be defined as method parameters

  • all method parameters have to be assigned a value in the where: block, for example null

  • the order of the method parameters has to be identical to the order of the data variables in the where: block

Of course, you can also make your extension only inject a value if none is set already, as the where: block assignments happen before the method interceptor is called

for this simply check whether invocation.arguments[i] is null or not

Data Driven Feature with Injected Parameter pre Spock 2.0
def 'test parameter injection'(a, b, MyInjectable myInjectable) {
  expect: myInjectable

  where:
  a    | b
  'a1' | 'b1'
  'a2' | 'b2'

  and:
  myInjectable = null
}
Data Driven Feature with Injected Parameter post Spock 2.0
def 'test parameter injection'(MyInjectable myInjectable) {
  expect: myInjectable

  where:
  a    | b
  'a1' | 'b1'
  'a2' | 'b2'
}